Check out or new product: Hog 4 Keyboard shortcut labels made from high quality, die cut, Lexan.  The labels are printed on the underside of the Lexan so they won’t rub off like inkjet printed labels.

We will be pre-selling them until April 1st.

• At that point, we will place the order for the number we sell.
• Then it will take about 5 weeks for production.

Check out the final production HOG DMX SuperBracket.

 Also, the FAQ has been flushed out. Photos have been added to the Installation section of the FAQ as well.
More questions or suggestions, Contact us!

New Black DMX Connectors and Black Screws

As a Whole Hog Lighting Console Programmer, the jobs I was often working on only needed 1-2 universes each per stage for multiple stages.  The PC Server/SuperWidget setup seemed to be the most ideal and economical solution. In my server cabinet, I was unhappy with the loose parts from my super widget.

As a programmer, I knew I needed to see my status lights for piece of mind that everything is working well. But at the same time, I needed to be able to access my DMX ports.  The SuperWidget sat on a shelf sideways so that I could access both, but this was not ideal. It was not locked down and if I had to move the server, I always had to double check all the connections.

There had to be a better way.

So I found a way to mount the SuperWidget with the LED lights facing out and made DMX jumpers to mount to the front panel.  I also wanted a part that could work for both of my SuperWidgets: the new black style and the older blue style. I shared the my homemade bracket with a few colleagues and they were very interested in the piece.  And the HOG DMX SuperBracket was born.  I used high quality Neutrik connectors with DMX cable of 120 impedance. I needed the quality of the cable to be top notch and it is.

First Prototpye

I thought, if this was something I found useful, maybe other programmers in the Hog community would as well. We had a prototype built just in time for Live Design International in Las Veags in 2013.  At the conference, interest grew tremendously.

3D Render HOG DMX SuperBracket

Now with the prototype refined, the HOG DMX SuperBracket is on the market.

Contact Us today to place your order.

Or if you have questions, check out our FAQ

The panel mount DMX female connectors have been rear mounted.  Check it out.

The Prototype is now back from our manufacturer. Check it out.

One update will be made to this prototype. The Female connectors will be black like the model!

Now, armed with the prototype, I am off to LDI conference in Las Vegas.

www.DynamiteLighting.com is live and ready to take orders.  We will post back here for updates on the product.

Here are some images back of the prototype before powder-coating and silk screening. We did modify the big oval after this test.